What to do if the diamond ring is covered with 5O2 glue
1 thought on “What to do if the diamond ring is covered with 5O2 glue”
Leave a Comment
You must be logged in to post a comment.
What to do if the diamond ring is covered with 5O2 glue
You must be logged in to post a comment.
1. Use hot water
2 Wipe with the insulation oil in the transformer
1 Drops on glue stains with banana water, and use old toothbrushes to continuously stir brush. , Repeatedly brushed, until it cleans. Water absorption cloth on the back of the clothing with glue marks, then apply some white vinegar to the glue marks, and finally scrub the cotton dipped water
2 to the original 502 to melt the original 502, and then quickly washed with water Drop, very spiritual!
3 Use insulating oil. The insulating oil in the inverted transformer is on the table. 502 glue quickly softened and can be rubbed quickly.
3 The same solution can be washed
502 glue is a resin glue. As long as the organic solvents of the resin are soluble, such as propine ketone. However, inhalation is poisonous, pay attention to the use method, you can stuff the sticky part into the bottle. It is said that it will be frozen in the refrigerator and the glue will fall. You can try
Stime the small area to stick 502 glue. Just soak it in hot water. Wait for 5 to 10 minutes to remove.