1 thought on “Does the mold industry have a future development?”
Bob
It has been more than ten years in the mold industry. There should be two problems in the subject. One is whether the mold industry has a future development, and the other is whether individuals are now engaged in line cutting.
Is to answer the first question first, whether the mold industry has a promising future. The mold industry is relatively small in the niche industry. From the perspective of the scale of output value and the number of practitioners, it is not high, but the mold industry has a significant enlarged effect on the related industries. For example, if the mold of 1 billion output value is hit out of the parts The value may be enlarged by 10 times, and after assembling products such as mobile phones, home appliances, and automobiles, the total output value will be higher. Therefore, the importance of the mold industry in national production is self -evident, and people's production and life and people's livelihood cannot be separated from molds. In the early days of the development of my country's automotive industry, due to the low level of domestic molds, large molds such as car bumpers have no design and manufacturing capabilities in China, and if domestic automobile manufacturers want to produce cars, they can only rely on imported molds from abroad. A set of molds cost millions of RMB, and it often goes through a long development cycle to complete the development of a new model.
In the advancement of the domestic mold industry technology, at the same time relying on the introduction of advanced equipment (high -end processing centers, electric sparks, line cutting, etc.) and design and processing software (CAD/CAE/CAM), plus plus The efforts of a large number of technical personnel have developed rapidly in the domestic mold industry in the past 10 years. However, at the same time, it also caused various chaos in the mold industry, such as various small processing plants, the levels of various small processing plants are uneven, the materials are charged with the secondary, the mold accuracy is low, and the cost of using high maintenance costs is high. On the one hand, mold customers are constantly requiring mold suppliers to reduce prices. On the other hand, raw materials and labor costs are indeed increased year by year, especially labor costs, and grow faster. It has a great impact on mold companies and the entire industry.
, but the mold industry is still promising.
The first, new technology, such as 3D printing, cannot completely replace mold production. The current 3D printing technology cannot be compared with the mold in terms of efficiency and cost. The product size is small and the batch is not large. No detailed discussion.
Secondly, domestic molds still have a lot of room for improvement in quality and accuracy, especially compared to the level of mold manufacturing of Japan and Germany. Therefore, the development of high -end precision molds is the growth point of the mold industry.
Third, with the development of new industries such as domestic mobile phones, automobiles, smart hardware, etc., especially the areas mentioned in Made in 2025, such as high -end CNC machine tools and robots, aerospace, New energy vehicles, rail transit and other fields will promote the mold industry. Therefore, don't worry about the future of the mold industry. However, whether it is an enterprise or an individual to find a way to stand at the front end of the industry and enhance its comprehensive competitiveness, rather than producing simple and rude molds while complaining that the industry has no future development.
The second question is whether the work that is currently engaged in line cut should be transferred. This problem involves personal career planning. It is not recommended to judge whether to change careers. It is not recommended to judge only based on the current salary or labor intensity. There is a saying that there is no work in the world. Many people abroad would rather give up high salary and choose their favorite jobs, and even volunteers. It mainly depends on whether you like this job and whether you can get satisfaction from this work. Then, to understand the direction of the development and improvement of this work, you should work in which direction you should, instead of doing one day for a day.
The direction of cutting work in the mold industry line, my suggestion is that the initial stage may be relatively hard and the salary is not high, but if individuals are determined to improve myself and have a strong learning ability, then then they have a strong learning ability. On the one hand, you can gradually accumulate the knowledge of mold processing technology, then learn software such as CAD, CAM, and then learn from manufacturing engineers, mold production plans, production processes and other positions. personnel.
In the Japanese mold industry, general young people enter the mold factory to operate equipment in the workshop. As they grow older, after multiple processes have accumulated rich processing experience, as they age, experience also increases, and experience also has experience. Rich and higher skills. Generally, these senior technicians are finally concentrated in the final polishing and trimming process, using their experience and technical judgments to judge and solve the problem of the final assembly or test verification of the mold. Japanese mold plants generally increase their salary every year with their age. These experienced and technical senior technicians are also the highest salary.
Therefore, my suggestion is that if you want to know whether you are willing to develop in this industry, if you need perseverance and continue to learn. If it is not suitable for individuals after personal considerations or communicating with senior industry personnel, it is also possible to find an industry that really suits you early.
above, discuss only from a few main aspects, no more discussions, and those who hope to continue to communicate can be privately letters or follow.
The molds are the mother of the industry. Most of the current products are produced by molds.
It can only use molds to achieve mass production, improve efficiency, and reduce costs.
has a very individual handle or a handmade product.
The current molds in China are still low -end, the technical content is relatively low, and there are many employees.
It, in terms of accuracy, life, manufacturing cycle and capabilities, there is still a large gap compared with international advanced countries and industrial advanced countries.
. Although the employees in my country's mold industry have developed rapidly in recent years, it is estimated that it has reached nearly one million people. One is insufficient total, and the other is insufficient quality.
The cannot meet the needs of industry development. According to Luo Baihui's survey,
The national mold industry employees of about 300,000 to 500,000, of which about 20%of engineering and technical personnel,
And high -level mold enterprise managers, middle and senior technical personnel and senior technical workers.
For the current mold industry, it is not limited to the domestic market. For foreign markets, the performance of my country's mold industry is equally good.
In in summary, the mold industry is still very promising. The confusion and helplessness at any time can only be summarized to your ability. do the best.
The is tired and dirty salary. It is not recommended to enter the industry.
Brothers, you are talking about it, but the two shifts of 500 months are indeed lower.
The mold is the root of the manufacturing industry. The level of mold is directly reflected in the manufacturing level. Compared with Europe and the United States, my country has a big gap. It is worthy of our mold people to learn. The accuracy of the mold is mainly determined by the processing accuracy. The commonly used processing equipment include computer gongs, grinding beds, line cutting, etc. I do n’t talk about it here. Simply speaking, cut off the lines and cut off the wires and walk slowly. Mid -walking is the enhancement type of fast -moving silk. Quick silk was represented by Da Meng, and the processing accuracy can reach 3-5. Slow -to -silk devices are mainly based on imported brands including Shadick, Makino, Mitsubishi and other accuracy.
Is with the proposal of the country's intelligent manufacturing country, I think the treatment of mold people will be greatly changed in the next few years. Shenzhen now generally cuts 7K operators, which has a lot of room for rise.
The personally recommend to operate slowly, learn the maintenance, operation, and programming of the equipment. The champion is out, as long as you want this line to do so, the monthly salary is definitely no problem. In a few years, I bought the machine as a boss and add bricks to the mold together. Come on
Isn't there such a sentence, 36 lines and travel champions, no matter the line of the line, there is a future
The future.
This is the most basic traditional industry in mass production of thousands of years. However, with the advancement of science and technology, such as 3D printing and other technologies, and the rapid development of modern manufacturing industry, we need to keep pace with the times and continue to innovate in order to always be in the future!
In recent years, due to various reasons in the mold industry, the development of the mold industry has faced many difficulties. It is not as good as before. The purchasing power is reduced, and the company also has a fierce competition price. The price and price of employees are going up. (In the last ten years, more and more graduates of the mold industry have been increasing, and tens of thousands of rising speeds are every year, leading to saturation of talents and increasing competitiveness. Especially for fresh graduates, work is not easy to find. Tired, the salary is low, the key is that the future development prospect is not clear. In the end, many people have to leave this industry.
It is deeply impressed by the evolution of these years. Based on position issues, it is naturally impossible to thoroughly study these issues. After all Analysis, I hope to help everyone, especially the new people who are just engaged in or who are going to engage in the mold industry. 111.jpg
It the above situations, most of the newcomers have doubts, Is the mold industry declined? Are there still a future of molds? In discussing this issue, first analyze the positioning of the mold in the entire manufacturing industry, this problem naturally knows its prospects. Positioning in the manufacturing industry:
Menuki is the mother of industry. Most of the current products are produced by molds. Only molds can make the product achieve mass production, improve efficiency, and reduce costs. There is also extremely extremely extremely extremely extremely extremely. Individual handle editions or handmade products do not use or use less molds. Modern is already a world of high -speed industrialization. There is no way to leave the mold. That is to say, one of the most important cornerstones in the industrial world is not The industry that may be eliminated. Especially in the current era of China's industrialization process, the mold industry is still a rising industry, and it is still an opportunity industry!
So what happened to the mold industry in recent years. Why do many bosses complain that they can't earn money, and mold practitioners also complain that the salary is not rising, and it is difficult to find work? Why?
N leads to several factors in the current dilemma of the mold industry. The first is the market environment. Since the financial crisis in 2008, in fact, the crisis has never been left. In the past two years, the government was 4 trillion yuan. It has been depressed again. These factors have led to the dilemma of the manufacturing industry, and the mold industry, as one of the core industries of the manufacturing industry, will naturally be directly impacted, the order is reduced, and the profit will be reduced. It's revenue. Especially in the Diaoyu Islands incident in 2012, all Japanese mold factories in the mold industry are basically more or less affected. In the overall world pattern, the economic downturn in Europe and the United States and other countries directly affects us The mold industry, because the more profitable molds in the entire mold industry are basically export molds, the export molds are less, and the profit will naturally be less. This is an external objective factor. It is still difficult to change this factor in the short term, which is basically impossible. According to myself Recently, I read some newspapers. The website's speculation on the future economy. For a long time in the future, it is difficult for the European and American economies to return to the previous fierceness. It can be expected to improve slowly, it is very difficult to take a step in the sky. Fortunately, the domestic environment is much better compared. It is certain that stable improvement in the long run is certain. The relative profit of domestic -selling molds may not be as good as export molds. However, the mold industry has no way to take off the profits. After all, in addition to the monopoly industry, it is impossible for any industry to have long -lasting profits, and it is normal for the ups and downs.
The development of everything is periodic. The current trough is only temporary. The overall trend of the Chinese economy will not change. As a result, the difficulties will definitely be in the future. The inside is slowly eliminated, so there is nothing to worry about this factor. Besides, the economic downturn is not only the mold industry, and the manufacturing industry will be affected.
The discussion due to the overall environment is arbitrarily arbitrarily. Unless the industry is completely dying or slightly, it cannot be said. After all, the mold industry is the basic industry. The mold to the industry is just as indispensable as catering to people's livelihood.
The mold is the mother of industry!
The technical content in the mold industry is limited and is not optimistic.
This out of the champion, exquisite karma. It can be described as everyone, I am everyone.
It has been more than ten years in the mold industry. There should be two problems in the subject. One is whether the mold industry has a future development, and the other is whether individuals are now engaged in line cutting.
Is to answer the first question first, whether the mold industry has a promising future. The mold industry is relatively small in the niche industry. From the perspective of the scale of output value and the number of practitioners, it is not high, but the mold industry has a significant enlarged effect on the related industries. For example, if the mold of 1 billion output value is hit out of the parts The value may be enlarged by 10 times, and after assembling products such as mobile phones, home appliances, and automobiles, the total output value will be higher. Therefore, the importance of the mold industry in national production is self -evident, and people's production and life and people's livelihood cannot be separated from molds. In the early days of the development of my country's automotive industry, due to the low level of domestic molds, large molds such as car bumpers have no design and manufacturing capabilities in China, and if domestic automobile manufacturers want to produce cars, they can only rely on imported molds from abroad. A set of molds cost millions of RMB, and it often goes through a long development cycle to complete the development of a new model.
In the advancement of the domestic mold industry technology, at the same time relying on the introduction of advanced equipment (high -end processing centers, electric sparks, line cutting, etc.) and design and processing software (CAD/CAE/CAM), plus plus The efforts of a large number of technical personnel have developed rapidly in the domestic mold industry in the past 10 years. However, at the same time, it also caused various chaos in the mold industry, such as various small processing plants, the levels of various small processing plants are uneven, the materials are charged with the secondary, the mold accuracy is low, and the cost of using high maintenance costs is high. On the one hand, mold customers are constantly requiring mold suppliers to reduce prices. On the other hand, raw materials and labor costs are indeed increased year by year, especially labor costs, and grow faster. It has a great impact on mold companies and the entire industry.
, but the mold industry is still promising.
The first, new technology, such as 3D printing, cannot completely replace mold production. The current 3D printing technology cannot be compared with the mold in terms of efficiency and cost. The product size is small and the batch is not large. No detailed discussion.
Secondly, domestic molds still have a lot of room for improvement in quality and accuracy, especially compared to the level of mold manufacturing of Japan and Germany. Therefore, the development of high -end precision molds is the growth point of the mold industry.
Third, with the development of new industries such as domestic mobile phones, automobiles, smart hardware, etc., especially the areas mentioned in Made in 2025, such as high -end CNC machine tools and robots, aerospace, New energy vehicles, rail transit and other fields will promote the mold industry. Therefore, don't worry about the future of the mold industry. However, whether it is an enterprise or an individual to find a way to stand at the front end of the industry and enhance its comprehensive competitiveness, rather than producing simple and rude molds while complaining that the industry has no future development.
The second question is whether the work that is currently engaged in line cut should be transferred. This problem involves personal career planning. It is not recommended to judge whether to change careers. It is not recommended to judge only based on the current salary or labor intensity. There is a saying that there is no work in the world. Many people abroad would rather give up high salary and choose their favorite jobs, and even volunteers. It mainly depends on whether you like this job and whether you can get satisfaction from this work. Then, to understand the direction of the development and improvement of this work, you should work in which direction you should, instead of doing one day for a day.
The direction of cutting work in the mold industry line, my suggestion is that the initial stage may be relatively hard and the salary is not high, but if individuals are determined to improve myself and have a strong learning ability, then then they have a strong learning ability. On the one hand, you can gradually accumulate the knowledge of mold processing technology, then learn software such as CAD, CAM, and then learn from manufacturing engineers, mold production plans, production processes and other positions. personnel.
In the Japanese mold industry, general young people enter the mold factory to operate equipment in the workshop. As they grow older, after multiple processes have accumulated rich processing experience, as they age, experience also increases, and experience also has experience. Rich and higher skills. Generally, these senior technicians are finally concentrated in the final polishing and trimming process, using their experience and technical judgments to judge and solve the problem of the final assembly or test verification of the mold. Japanese mold plants generally increase their salary every year with their age. These experienced and technical senior technicians are also the highest salary.
Therefore, my suggestion is that if you want to know whether you are willing to develop in this industry, if you need perseverance and continue to learn. If it is not suitable for individuals after personal considerations or communicating with senior industry personnel, it is also possible to find an industry that really suits you early.
above, discuss only from a few main aspects, no more discussions, and those who hope to continue to communicate can be privately letters or follow.
The molds are the mother of the industry. Most of the current products are produced by molds.
It can only use molds to achieve mass production, improve efficiency, and reduce costs.
has a very individual handle or a handmade product.
The current molds in China are still low -end, the technical content is relatively low, and there are many employees.
It, in terms of accuracy, life, manufacturing cycle and capabilities, there is still a large gap compared with international advanced countries and industrial advanced countries.
. Although the employees in my country's mold industry have developed rapidly in recent years, it is estimated that it has reached nearly one million people. One is insufficient total, and the other is insufficient quality.
The cannot meet the needs of industry development. According to Luo Baihui's survey,
The national mold industry employees of about 300,000 to 500,000, of which about 20%of engineering and technical personnel,
And high -level mold enterprise managers, middle and senior technical personnel and senior technical workers.
For the current mold industry, it is not limited to the domestic market. For foreign markets, the performance of my country's mold industry is equally good.
In in summary, the mold industry is still very promising. The confusion and helplessness at any time can only be summarized to your ability. do the best.
The is tired and dirty salary. It is not recommended to enter the industry.
Brothers, you are talking about it, but the two shifts of 500 months are indeed lower.
The mold is the root of the manufacturing industry. The level of mold is directly reflected in the manufacturing level. Compared with Europe and the United States, my country has a big gap. It is worthy of our mold people to learn. The accuracy of the mold is mainly determined by the processing accuracy. The commonly used processing equipment include computer gongs, grinding beds, line cutting, etc. I do n’t talk about it here. Simply speaking, cut off the lines and cut off the wires and walk slowly. Mid -walking is the enhancement type of fast -moving silk. Quick silk was represented by Da Meng, and the processing accuracy can reach 3-5. Slow -to -silk devices are mainly based on imported brands including Shadick, Makino, Mitsubishi and other accuracy.
Is with the proposal of the country's intelligent manufacturing country, I think the treatment of mold people will be greatly changed in the next few years. Shenzhen now generally cuts 7K operators, which has a lot of room for rise.
The personally recommend to operate slowly, learn the maintenance, operation, and programming of the equipment. The champion is out, as long as you want this line to do so, the monthly salary is definitely no problem. In a few years, I bought the machine as a boss and add bricks to the mold together. Come on
Isn't there such a sentence, 36 lines and travel champions, no matter the line of the line, there is a future
The future.
This is the most basic traditional industry in mass production of thousands of years. However, with the advancement of science and technology, such as 3D printing and other technologies, and the rapid development of modern manufacturing industry, we need to keep pace with the times and continue to innovate in order to always be in the future!
In recent years, due to various reasons in the mold industry, the development of the mold industry has faced many difficulties. It is not as good as before. The purchasing power is reduced, and the company also has a fierce competition price. The price and price of employees are going up. (In the last ten years, more and more graduates of the mold industry have been increasing, and tens of thousands of rising speeds are every year, leading to saturation of talents and increasing competitiveness. Especially for fresh graduates, work is not easy to find. Tired, the salary is low, the key is that the future development prospect is not clear. In the end, many people have to leave this industry.
It is deeply impressed by the evolution of these years. Based on position issues, it is naturally impossible to thoroughly study these issues. After all Analysis, I hope to help everyone, especially the new people who are just engaged in or who are going to engage in the mold industry. 111.jpg
It the above situations, most of the newcomers have doubts, Is the mold industry declined? Are there still a future of molds? In discussing this issue, first analyze the positioning of the mold in the entire manufacturing industry, this problem naturally knows its prospects. Positioning in the manufacturing industry:
Menuki is the mother of industry. Most of the current products are produced by molds. Only molds can make the product achieve mass production, improve efficiency, and reduce costs. There is also extremely extremely extremely extremely extremely extremely. Individual handle editions or handmade products do not use or use less molds. Modern is already a world of high -speed industrialization. There is no way to leave the mold. That is to say, one of the most important cornerstones in the industrial world is not The industry that may be eliminated. Especially in the current era of China's industrialization process, the mold industry is still a rising industry, and it is still an opportunity industry!
So what happened to the mold industry in recent years. Why do many bosses complain that they can't earn money, and mold practitioners also complain that the salary is not rising, and it is difficult to find work? Why?
N leads to several factors in the current dilemma of the mold industry. The first is the market environment. Since the financial crisis in 2008, in fact, the crisis has never been left. In the past two years, the government was 4 trillion yuan. It has been depressed again. These factors have led to the dilemma of the manufacturing industry, and the mold industry, as one of the core industries of the manufacturing industry, will naturally be directly impacted, the order is reduced, and the profit will be reduced. It's revenue. Especially in the Diaoyu Islands incident in 2012, all Japanese mold factories in the mold industry are basically more or less affected. In the overall world pattern, the economic downturn in Europe and the United States and other countries directly affects us The mold industry, because the more profitable molds in the entire mold industry are basically export molds, the export molds are less, and the profit will naturally be less.
This is an external objective factor. It is still difficult to change this factor in the short term, which is basically impossible. According to myself Recently, I read some newspapers. The website's speculation on the future economy. For a long time in the future, it is difficult for the European and American economies to return to the previous fierceness. It can be expected to improve slowly, it is very difficult to take a step in the sky. Fortunately, the domestic environment is much better compared. It is certain that stable improvement in the long run is certain. The relative profit of domestic -selling molds may not be as good as export molds. However, the mold industry has no way to take off the profits. After all, in addition to the monopoly industry, it is impossible for any industry to have long -lasting profits, and it is normal for the ups and downs.
The development of everything is periodic. The current trough is only temporary. The overall trend of the Chinese economy will not change. As a result, the difficulties will definitely be in the future. The inside is slowly eliminated, so there is nothing to worry about this factor. Besides, the economic downturn is not only the mold industry, and the manufacturing industry will be affected.
The discussion due to the overall environment is arbitrarily arbitrarily. Unless the industry is completely dying or slightly, it cannot be said. After all, the mold industry is the basic industry. The mold to the industry is just as indispensable as catering to people's livelihood.
The mold is the mother of industry!
The technical content in the mold industry is limited and is not optimistic.
This out of the champion, exquisite karma. It can be described as everyone, I am everyone.